FREE NEWSLETTER

L.A.SLEEVE “Amphibian ProCross-ProCool” Honda 2.4L Performance Sleeves

8 May 2018

L.A.SLEEVE introduces its ProCross ProCool Sport Compact sleeves for the Honda 2.4L motor. American made and manufactured from our proprietary Moly2000 ductile, the finest iron available. Brinell hardness of 265 ( 98.7 Rockwell B ) our material has greater density than any other sleeve competitor. Greater material density provides consistent grain flow micro-structure. Our centrifugal process involves patented procedures to control our desired graphite and matrix distribution throughout the sleeve. Moly2000 ductile is wear and shock resistant to ensure piston rings riding a stable bore surface, creating ring seal and compression boundries. Metallurgical high carbon ferrous material properties of molybdenum, nickel, graphite nodules, copper, silicon and chromium provide ultimate load bearing ability.Continuous roundness, hardness and concentricity offers “no worry” parts to build the best cylinder sleeve a sport compact motor can run.

The Amphibious ProCross ProCool cross flow wet flanged sleeve design provides better cooling when water temperture rises. The flanged area of the sleeve is integral to the water cavity, sustaining proper cooling for performance street motors. The vertical peak and valley plateau creates a turbulent cross flowing feature which will hold coolant along the sleeve for a prolonged period. This cooling assistance will allow the motor builder to build a higher performing street motor without the worry of overheating. The sleeves are capable of handling normal aspiration, turbo or nitrous. To learn more visit www.lasleeve.com or call the staff at 562-945-7578.

Partners

Latest issue

FREE Newsletter

Stay up to date and a chance to win 1 Years Subscription*

  • This field is for validation purposes and should be left unchanged.

Latest Tweets

Stay up to date with our social world

RACE TECH magazine @RaceTechmag
22 Jun
Race-ready Tesla P100DL unveiled in Barcelona https://t.co/dL23IX40mW
RACE TECH magazine @RaceTechmag
20 Jun
VW I.D. R electric racing car sets fastest time in Pikes Peak qualifying https://t.co/gPzRcxOsqL
RACE TECH magazine @RaceTechmag
20 Jun
Integral e-Drive the electric drives division of @integralpowert, is the #technology partner of @volkswagenms fully… https://t.co/E9iii8vkk0
RACE TECH magazine @RaceTechmag
19 Jun
Red Bull confirms engine switch for 2019 https://t.co/VcYR2WRn6e
RACE TECH magazine @RaceTechmag
17 Jun
Congratulations also to @gibsontech1 for such a great effort in LMP1 and of course LMP2
RACE TECH magazine @RaceTechmag
17 Jun
Congratulations @Toyota_Hybrid.What a result & well deserved. The fruit of putting in so much work behind the scenes
RACE TECH magazine @RaceTechmag
16 Jun
RACE TECH magazine @RaceTechmag
15 Jun